Up: Table of Contents
SRAM G8[1]
  Number of gear teeth       Number of gear teeth            
Gear Sun Gear 1 Pinion to Sun 1 Pinion to Ring 1 Ring gear 1 1=R to P, P to S 2=Direct, 3=P to R   Gear Drive Ratio Stage 1 drive ratio as fraction Sun Gear  2 Pinion to Sun 2 Pinion to Ring 2 Ring gear 2 Path: 1=R to P, 2=Direct, 3=P to R Gear Drive Ratio Stage 2 drive ratio as fraction Total Drive Ratio[2] Total drive ratio as fraction Ratio incre- ment
1 54 15 15 84 1 0.609    14/23   45 24 24 93 2 1.000 1           0.609      14/23     
2 48 21 15 84 1 0.710    49/69   45 24 24 93 2 1.000 1           0.710      49/69    1.167
3 57 12 15 84 1 0.541   112/207  45 24 24 93 3 1.484 1   15/31   0.803     224/279   1.131
4 54 15 15 84 1 0.609    14/23   45 24 24 93 3 1.484 1   15/31   0.903      28/31    1.125
5 48 21 15 84 1 0.710    49/69   45 24 24 93 3 1.484 1   15/31   1.054 1      5/93    1.167
6 57 12 15 84 1 0.541   112/207  57 12 24 93 3 2.226 2    7/31   1.204 1     19/93    1.143
7 54 15 15 84 1 0.609    14/23   57 12 24 93 3 2.226 2    7/31   1.355 1     11/31    1.125
8 48 21 15 84 1 0.710    49/69   57 12 24 93 3 2.226 2    7/31   1.581 1     18/31    1.167

[1]
John Allen:
Ratios are calculated from tooth counts displayed on a chart by SRAM.
[2]
John Allen:
This is the product of the ratios of the two stages.